unisonic technologies co., ltd dtc123j npn silicon transistor www.unisonic.com.tw 1 of 3 copyright ? 2012 unisonic technologies co., ltd qw-r206-076.e npn digital transistor (built-in resistors) ? features * built-in bias resistors enable the c onfiguration of an inverter circuit without connecting external input resistors (see equivalent circuit). * the bias resistors consist of th in-film resistors with complete isolation to allow negative biasing of the input. they also have the advantage of almost completely eliminating parasitic effects. * only the on/off conditions need to be set for operation, making device design easy. ? equivalent circuit ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 dtc123jl-ae3-r dtc123jg-ae3-r sot-23 g i o tape reel dtc123jl-al3-r dtc123jg-al3-r sot-323 g i o tape reel dtc123jl-an3-r dtc123jg-an3-r sot-523 g i o tape reel dtc123jl-t92-b dtc123jg-t92-b to-92 g o i tape box dtc123jl-t92-k dtc123jg-t92-k to-92 g o i bulk dtc123jl-t92-r DTC123JG-T92-R to-92 g o i tape reel dtc123jl-t9s-k dtc123jg-t9s-k to-92sp g o i bulk ? marking (for sot-23/s ot-323/sor-523 package) cc3j j: lead free j : halogen free
dtc123j npn silicon transistor unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r206-076.e ? absolute maximum ratings (t a =25 c, unless otherwise specified) parameter symbol ratings unit supply voltage v cc 50 v input voltage v in -5 ~ +12 v output current i o 100 ma i c ( max. ) 100 power dissipation sot-23/ sot-323 p d 200 mw sot-523 150 to-92 625 to-92sp 550 junction temperature t j 150 c storage temperature t stg -55 ~ +150 c note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? electrical characteristics (t a =25 c) parameter symbol test conditions min typ max unit input voltage v i ( off ) v cc =5v, i o =100 a 0.5 v v i ( on ) v o =0.3v, i o =5ma 1.1 output voltage v o ( on ) i o /i i =5ma/0.25ma 0.1 0.3 v input current i i v i =5v 3.6 ma output current i o ( off ) v cc =50v, v i =0v 0.5 a dc current gain g i v o =5v, i o =10ma 80 input resistance r 1 1.54 2.2 2.86 k ? resistance ratio r 2 /r 1 17 21 26 transition frequency f t v ce =10v, i e = ? 5ma, f=100mhz (note) 250 mhz note: transition frequency of the device
dtc123j npn silicon transistor unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r206-076.e ? typical characteristics output current, i out (a) input current, i in (a) gnd(+) current, i gnd(+) (a) utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|